• Ultra Low Loss Connectors specially designed requiring no tuning to obtain extremely low loss (<0.1dB).

Specialty Fiber Jumper Cables

• Jumper Cables can be made with a variety of fibers: 400 nm to 2000 nm, polyimide or Hytrel coatings.

PM Jumper Cables

• Polarization Maintaining connectors have low insertion loss, high extinction ratios, and high return loss. PM fibers can be terminated with standard connectors or our Ultra Low Loss Connectors.

Fiber Optic Component Termination

• Ultra Low Loss Connector guarantees the maximum performance from your fiber optic components. Experienced in terminating lasers, detectors, splitters, and complete test systems. Termination facility has ESD protection to ensure the protection of ESD sensitive devices.

Fiber Bundles

• Multiple singlemode and multimode fibers can be installed into standard connectors for mating to detectors. Up to 19 fibers in an FC and up to 45 fibers into an SMA connector. Multiple fibers can also be installed into DIN, E-2000, HMS-10, SC, and ST Connectors.
• Large numbers of fibers can be bundled into small, custom-shaped areas. At this time, 550 fibers have been mounted in a small square, with 125μm spacing between fibers.
• Multi-pin military-style connectors can be mounted on both ends of a fiber bundle, or the bundle can be broken out into individual single-fiber connectors at one end.