A sample kit containing the most commonly used fiber optic organization products. Provides hands-on experience with these products.
|
Similar to the EFA SD KIT, the EFA MD KIT contains representative samples of the most popular fiber optic organization products, but in smaller quantities.
|
Clips made by Egide UK come in a wide variety of sizes and configurations, to meet your special fiber optic organization requirements.
|
Reels provide a method for storage of excess fiber in an optical circuit, and guarantee a minimum bend radius in the fiber for prevention of excess losses.
|
The stacking post and standoff are designed for EgideUK reels of all sizes, and offer methods for mounting reels without the use of adhesive pads.
|
Corner guides are used to maintain minimum bend radii at corners of a circuit board. Edge guides prevent fiber from spilling off the circuit board.
|
Dust caps for both connectors and adapters are essential for maintaining cleanliness of fiber optic connection points.
|
Plastic assembly solidly mounts to bulkhead, firmly holds 3 mm-jacketed cable by Kevlar lining, and provides strain-relief boot outside the bulkhead.
|
This small rubber bulkhead-mounted boot allows 900-micron-buffered fibers to pass through the bulkhead while being protected from damage to the buffer. The flexible external section controls the bend radius of the fiber in the vicinity of the bulkhead.
|
This is a peg-board tray which can be used for prototyping fiber optic organization designs. Small holes will accept rivets used to mount parts.The board can be broken into 3 equal parts.
|
Used for laying out and mounting fiber optic arrays. Built-in corner guides; slots for fiber or device clips; mounting holes.
|
Array tray with screw-on lid, bend-radius guides, and locations for input-output ports.
|
Rackmount Horizontal Cable Management Bar
|
Ultra High-Density 1-RU Fiber Storage Tray, 19" or 23" rack size, ETSI Compatible
| | |
|
|