|
|
 |
Fiber optic reels, made by Egide UK, provide a method for storage of excess fiber in an optical circuit, and
guarantee a minimum bend radius in the fiber for prevention of excess
losses.They are available in a number of bend-radii and heights, as shown in the list below. The reels can be mounted directly to a circuit board using double-sided adhesive pads, or by using a 10 mm standoff or a stacking post (see details under "Other items you may like..." at the bottom of this page). There are also holes which can be used with screws or other fastening devices. With the exception of the EFA04 23 001, the reels can be broken into quarters to be used as corner guides.
Parts numbers and descriptionEFA04 04 001 25 mm Min. Bend Radius, 4 mm height Click for drawing
EFA04 04 ASSY 25 mm Min. Bend Radius, 4 mm height, with mounting pads
EFA04 10 001 30 mm Min. Bend Radius, 4 mm height Click for drawing
EFA04 10 ASSY 30 mm Min. Bend Radius, 4 mm height, with mounting pads
EFA04 14 001 30 mm Min. Bend Radius, 12 mm height Click for drawing
EFA04 14 ASSY 30 mm Min. Bend Radius, 12 mm height, with mounting pads
EFA04 21 001 25 mm Min. Bend Radius, 6.3 mm height Click for drawing
EFA04 21 ASSY 25 mm Min. Bend Radius, 6.3 mm height, with mounting pads
EFA04 23 001 40 mm Min. Bend Radius, 6.3 mm height Click for drawing
EFA04 23 ASSY 40 mm Min. Bend Radius, 6.3 mm height, with mounting pads
EFA04 76 001 35 mm Min. Bend Radius, 6.3 mm height Click for drawing
EFA04 76 ASSY 35 mm Min. Bend Radius, 6.3 mm height, with mounting pads
Other items you may like...
The stacking post and standoff are designed for EgideUK reels of all sizes, and offer methods for mounting reels without the use of adhesive pads.
| | |
|