Home
|
Contact Us
Questions? Call :
1-617-232-6224
Search
HOME
COMPONENTS
JUMPER CABLES
FIBER MANAGEMENT
CONNECTOR INSPECTION
CONNECTOR CLEANING
TEST EQUIPMENT
TOOLS
BROADCAST
Adapters
Attenuators
Circulators
Connectors
Couplers & WDMs
Custom Modules
Isolators
Polarizers & Depolarizers
Other
Single Mode
Multimode
Polarization Maintaining
High Power Jumper Cables
MIL-AERO
Reference Cables
Fiber Bundles
Broadcast
Component Termination
Power Meters
Laser & LED Sources
Interferometer
Modal Analyzer
Cleave Checker
Cleaning & Inspection Kits
SMPTE 304 Cleaners
SMPTE 304 Connector Ferrule GuideTool
SMPTE 304/311 Cable Assemblies
SMPTE 304/311 Test Probe
SMPTE 304/311 Fusion Splicer
Optical Fiber Video Patch Panel Jack
Audio Transmission System
Home
>
CONNECTOR CLEANING
AFC-3000 Connector Cleaning Gun
Enlarge Image
Use of AFC-3000 with extension
Cleaning SMPTE 304 Female
Cleaning SMPTE 304 Male
Part No.
AFC-3000
Send Link to a Friend
The quickest and most reliable ferrule cleaning device available!
The AFC-3000 Cleaning Gun uses a cleaning filament which is mechanically pulled and rotated across the surface of the connector ferrule, providing an immaculately clean surface in just 3 seconds of operation. The internal electric motor (powered by two AA batteries) is actuated by insertion of the gun tip into a bulkhead adapter (for through-the-adapter cleaning), or by inserting the connector ferrule directly into the gun tip. The motor automatically stops operating after 3 seconds of cleaning. Unless the contamination is baked on the ferrule, or the ferrule itself is damaged, the cleaning process should require no more than a single cleaning cycle.
Tips, both male (for direct cleaning) and female (for through-the-bulkhead cleaning) are available for most commonly-used types of connectors (circular ferrules only!).
Cleaning cartridges are available for 2.5 mm and 1.25 mm ferrules. The 2.5 mm cartridges are available in short and extended-length (4-inch) versions. The extended-length cartridge requires a 4-inch extension to be used between the gun and the tips. All cartridges provide 600 cleaning cycles.
Of special interest to television broadcasters:
The AFC-3000 has a tip specifically designed for use with
SMPTE 304
connectors (commonly called "Lemo" connectors). This is the quickest, most reliable method to clean the fiber optic ferrules in these hybrid connectors. (NOTE: The ferrule guide sleeves on the female connector must be removed for cleaning the ferrules. The connector tool shown below is used for this purpose.)
The top picture in the left-hand column shows the AFC-3000 with the extended-length 2.5 mm cartridge, the 4-inch extension, and a tip mounted on the gun. (Please click on the picture to enlarge it)
(above) The AFC-3000 with the short 2.5 mm cartridge and the SC tip mounted.
(above) Exploded view of the AFC-3000, SC tip, and short 2.5 mm cartridge.
(above) The AFC-3000 with the LC tip and 1.25 mm cartridge mounted.
Questions or Pricing
Related products
AFC-3000 Cartridge
Replacement cleaning cartridges specifically made for the AFC-3000 cleaning gun.
Questions or Pricing
SMPTE 304 Connector Tool
Essential for extraction and insertion of ferrule guides in the female SMPTE 304 connector
Questions or Pricing
AFC-3000 Kit Case
Versatile rugged carrying case for the AFC-3000 gun, two or 3 spare cartridges, 20 gun tips and/or other small accessories.
Questions or Pricing
Home
|
Search Catalog
|
Site Map
Copyright 2009 - Optimark Fiber Optics, All Rights Reserved.